Enerlites MPP-24 Power Pack

Enerlites MPP-24 Power Pack

The MPP-24 power pack is the foundation for any low voltage lighting control system. It supplies low voltage power to occupancy sensors and other control devices, switching line voltage in response to signals from control devices. The power pack is attached to existing junction boxes or mounted into fixture wiring trays. Low voltage wiring should use at least 22-gauge wire. High voltage connections should use at least 14-gauge. Always check local building codes. After initial wiring is completed, check wiring diagrams to verify the power pack is wired correctly. Improper wiring can cause damage to the power pack, lighting system, occupancy sensor and other control devices.

Specifications

  • Power Input: 120/230/240/277 VAC, 50/60Hz
  • Power Supply Output: 150mA @ 24VDC (with relay connected)
  • Operating Temperature: 32°F to 131°F (0°C to 55°C)
  • Load Requirements: Ballast: 20amp @120/277VAC,
  • Incandescent: 20amp @ 120VAC, Motor: 1HP @ 120/240VAC
  • MPP-24 power pack supply power for up to 6 MPC-50L sensors
  • Power pack: 150mA, 20A ballast or incandescent
  • Certification UL/CUL Listed